What the potato trimmer attachment looks like and how to use it correctly

In the classic sense, the trimmer is designed for cutting grass. But few people know that when changing the nozzle, it is used as a weed weeding device. Such a device greatly facilitates the work of summer residents and makes the weeding of better quality.

What attachments exist and how to use them correctly, we will tell in the article.

What is the Potato Trimmer Attachment

A trimmer is a device that runs on electricity or gasoline. The working part of the device is the attachments that change depending on the purpose. The equipment saves time and energy for summer residents and is highly efficient.

What does it look like

There are two types of trimmer attachments:

1. Disk. Working part - two pairs of cutting discs.
2. Serrated. The working part consists of cutters sequentially located on the shaft.

The choice of nozzle depends on the type of soil. Disc are used mainly on heavy soils. They are stiff and durable. Toothed nozzles are used to treat light, loose soils. They are much lighter in weight than discs.

Principle of operation

The principle of operation of the trimmer with the weeding attachment is as follows. The transmission of torque from the engine to the hitch is carried out by means of a shaft arranged in the rod. The knives penetrate the soil, pulling the weeds along with the root system out of the soil. The weeds themselves remain on the surface.

Important! The main principle of the weeding attachment is that it does not cut green vegetation, but pulls it along with the root system.

Types of construction

The design of such a device, as a rule, is equipped with one or two pairs of cutting parts. They are attached to the trimmer instead of the gearbox at the bottom of the boom or near the motor. The brushcutter works by burning liquid fuel.

Types of structures:

1. Cultivator. It is considered the most popular attachment. Its advantage is the simultaneous weeding and loosening of the soil. The cultivator consists of disc elements that are put on one axle.
2. Three- or two-bladed knife. It is used for cutting weeds. It is a metal plate with two or three pointed blades along the edges.
3. Trimmer head with line. Designed for cutting weeds. Processes aisles. For work, two types of fishing line are used: circular and faceted.

Choose the right attachment for your device. Too heavy options will overheat the engine.

Mounting options

The following methods are used to attach the working part:

• near the engine instead of the rod;
• instead of a gearbox under the bar;
• the way in which the rod is disconnected in the middle.

The number of slots on the end of the rod is different for each model. Therefore, when choosing a nozzle, pay attention to this.

The best models and prices for them

When choosing trimmer attachments, first check the manufacturers and design specifications. Pay attention to the value for money. Monitor the reviews of the model you like. Let's talk about the best models of nozzles on the market.

KAAZ Kat-MC250P

Refers to cultivator attachments.Equipped with a soil deepener. Suitable for use in small areas.

Specifications:

• manufacturer - Japan;
• brands: trimmer ECHO PAS-Tiller Cultivator, brushcutter PAS-265ES;
• price: 9990 rubles;
• knife material: hardened steel;
• dimensions of the working body: width - 24 cm, depth - 36 cm.

KR400MP MAKITA 195710-3

Designed for small areas. The working part consists of cutters.

Specifications:

• manufacturer - Japan;
• brands: EX2650LH, DUX60Z;
• price: 17 160 rubles;
• knife material: metal;
• dimensions of the working body: width - 16 cm, diameter of cutters - 23.3 cm.

Milling type working body

Designed for weeding, which thoroughly digs up the soil, facilitating the penetration of moisture and nutrients and saturating it with oxygen.

Specifications:

• manufacturer - Taiwan;
• brands: for petrol cutters TAC;
• price: 7900 rubles;
• knife material: steel;
• food: gasoline engine;
• weight: 5 kg;
• dimensions of the working body: width - 18 cm, diameter of cutters - 20 cm.

How to properly weed potatoes with a trimmer with a special attachment

Timely and correct weeding potatoes will provide active formation of leaves and tubers of culture. The trimmer with attachments will help you quickly and efficiently remove weeds.

Basic rules

For weeding potatoes using a trimmer, several rules are followed:

1. Before work, wear equipment (goggles, respirator), which will protect against dust and small particles.
2. Weeding is carried out regularly every 14 days.
3. Use the device at a plant height of up to 20 cm.
4. An event is held in dry weather in order to mulch the plantings.
5. Do not deepen the cutters too much. Working depths up to 2 cm are sufficient. This will provide the soil with oxygen and remove the dried crust.
6. Do not use a device with low power for a long time - take breaks to avoid overheating the engine.
7. After processing, the working part is disinfected in order to get rid of pathogens.

Precautions

Safety rules when using the potato trimmer:

1. Use metal knives only on straight bar trimmers. Use plastic knives for the curved bar.
2. Be sure to read the instructions before use.
3. Before starting work, check the serviceability of the device.
4. Put on protective equipment before starting work.
5. Weed in dry weather.
6. Fuel tools powered by gasoline 1 cm below the lower edge of the filler neck only outdoors, with the engine off and cold.
7. Warm up the engine at medium speed.
8. Use the tool only for its intended purpose.

Advantages and disadvantages of using

Benefits of using a trimmer while weeding:

• the speed of the task;
• high quality of weeding;
• copes well with young weeds;
• loosens and enriches the soil with oxygen;
• weeding with a trimmer is organic farming;
• the possibility of weeding in small areas;
• the nozzle is equipped with a protective cover.

Disadvantages of using a weeding trimmer:

• the weight of the device increases;
• the cutter does not allow the blades to be pressed close to the soil;
• during operation there is constant vibration and noise;
• long cultivation of the land using this device is unsafe for health due to gasoline vapors.

Is it possible to make such a nozzle with your own hands

It is not recommended to make the weeding accessory by hand, as it is difficult to select its width and diameter of the cutters so that the trimmer motor is not damaged. But the price factor has a great influence on summer residents.

Craftsmen offer options for making do-it-yourself nozzles.

Necessary materials:

• metal sheet 5 mm thick;
• nails;
• welding machine;
• metal cutter;
• fittings.

Stages of manufacturing a three-blade nozzle:

1. Take a sheet of metal.
2. Draw circles with a diameter of 32, 22 and 11 cm.
3. Cut them along the contour and make holes for the working shaft in the center of each circle.
4. Take the reinforcement and weld the discs at a distance of 1-2 cm.
5. Take nails and weld them to the discs.
6. It turns out an excellent homemade hedgehog nozzle.

When working with homemade implements, be sure to use the protective cover on the trimmer.

Reviews

Before starting weeding with the trimmer, assess your options. Many summer residents share their experience.

Ivan, Minsk: «I think that with modern technologies it is imperative to use them. But their use must be approached wisely. For example, at the beginning I weed potatoes exclusively with a trimmer, and with a motoblock I go through them with a walk-behind tractor and cut the combs. The potatoes are always great. "

Vitaly, Novgorod: “I have a small potato farm. More recently, I have mechanized potato weeding, which has helped reduce labor. It turned out to be both quick and cost-effective. "

It is interesting:

The nuances of storing potatoes in a vegetable store.

Stomach treatment with potato juice.

What is the caliber of potatoes (table) and what does it mean.

Conclusion

Weeding potatoes is an integral part of crop cultivation techniques. Using a trimmer for these purposes definitely facilitates and speeds up the weeding process. And the result is harvest - will delight you with quality and quantity.